Chauvin Arnoux PEL104 Power & Energy Logger, Contractor Kit
- Compact PEL for monitoring single-, split-, & three-phase electrical systems
- Includes Chauvin Arnoux’s DataView Software
- Specifically designed for electrical contractors
The Chauvin Arnoux PEL104 Power & Energy Logger Contractor kit includes the Chauvin Arnoux PEL104 Power & Energy Logger and an array of accessories including Dataview Software, clamps, and a hard case.
Chauvin Arnoux PEL104 Power & Energy Logger Overview
Equipped with four voltage and three current inputs, the Chauvin Arnoux PEL104 Power & Energy Logger is a compact, comprehensive datalogging instrument suitable for monitoring the electrical parameters of single-, split-, and three-phase systems. Capable of taking 128 samples/cycle simultaneously on each phase, the Chauvin Arnoux PEL104 Power & Energy Logger can measure:
- AC/DC voltage up to 1000V
- Current up to 10kA AC or 5kA DC
- Power (active, apparent, and reactive): 10 W/var/VA to 10 GW/Gvar/GVA
- Energy: 4 EWh/ 4 EVAh/ 4 EVarh
- Total energy (4 quadrants)
- Phase data: cos φ, tan Φ, power factor (PF)
- Harmonics up to the 50th order
- Crest factor
The Chauvin Arnoux PEL104 Power & Energy Logger also includes an Alarm mode with user-defined limits and an events log with email alerts. Readings are saved to the Chauvin Arnoux PEL104 Power & Energy Logger’s SD card, which can hold several years’ worth of data. USB, Ethernet, Wi-Fi, and 3G GPRS enable data transfer. Once downloaded to a PC/laptop, the supplied DataView Software may be used to create customised reports.
For more information regarding the Chauvin Arnoux PEL104 Power & Energy Logger, please click here.
Video
PASS Presents Power Analysis with an Energy Logger Can Reduce Usage Costs
PASS Presents Chauvin Arnoux PEL Power & Energy Logger - Snap Interviews
What’s Included?
- Chauvin Arnoux PEL104 Power & Energy Logger
- 3x MA194 Flexible Current Sensors
- 4x Reeling Boxes with 3m Voltage Leads
- 4x Crocodile Clips
- Mains Adapter
- Colour Identifiers
- SD Card-USB PC Adapter
- Chauvin Arnoux DataView Software (Perpetual Licence)
Call 01642 931 329 or complete the form:
Chauvin Arnoux PEL104 Power & Energy Logger Technical Specifications
| Display | With quadruple digital display |
| Types of installations | Single-phase, split-phase, three-phase with or without neutral, and many other specific configurations |
| Number of channels | 3 voltage inputs, 3 current inputs (calculated neutral current) |
| Measurements | |
| Network frequency | DC, 50 Hz, 60 Hz and 400 Hz |
| Voltage (measurement ranges) | 10.00 -1,000 Vac/dc |
| Current (depending on sensors) (measurement ranges) |
5 mAac to 10 kAac / 50 mAdc to 1.4 kAdc |
| Calculated measurements | |
| Ratio | Up to 650,000 V / up to 25,000 A |
| Power | 10 W to 10 GW / 10 var to 10 Gvar / 10 VA to 10 GVA |
| Energy | Up to 4 EWh / 4 EVAh / 4 Evarh (E = 10 18) |
| Phase | cos φ, tan Φ, PF |
| Harmonics | THD |
| Additional functions | |
| Phase sequence | Yes |
| Min / Max | Yes |
| Mounting | Magnet |
| Recording | |
| Sampling / Acquisition interval / Aggregation | 5 measurements/s - from 1 min to 60 min |
| Memory | SD card, 8 GB (SD-HC card up to 32 GB) |
| Communication | Ethernet, Bluetooth, USB, Wifi and GPRS |
| Power supply | 110 V - 250 V (+10 %, -15 %) @ 50-60 Hz & 400 Hz |
| Safety | IEC 61010 600 V CA T IV and 1 000 V CA T III |
| Mechanical Specifications | |
| Dimensions | 256 x 125 x 37 mm without sensor |
| Weight | <1 kg |
| Casing | IP54 |
